86-13937153820
No.72,Beihuan Road, Zhengzhou
density meter price:
1,reading accuracy
2,testing and printing
3,widely used
4,easy to operate
Practical compact size density meter price with economical
Product introduction:
Our factory developed DM series black and white densitometer, is the use of computer tech quality products. It has a reading accuracy, good stability, easy operation and a series of features. It can be widely used for non-destructive testing, printing, medical and other industries. Each instrument are random with density tablets, used to verify the accuracy of the instrument.
Features and functions:
Reading accuracy, good stability, convenient operation, highlighted. With cold light source view, Suitable for printing, PCB film, nondestructive testing, photosensitive materials, film, medical, packaging film (film coating, coating thickness and uniformity detection), colored glass industry.
Black and white densitometer characteristics:
1.high-precision instruments, small size, light weight, easy to carry, using computer control, easy to operate, high accuracy, good stability.
2.Use the AC modulated light source the synchronous receiver detection technology, computer control and data processing, thus greatly improving the ability of anti-light, electrical interference and temperature stability.
3.The factory has strict debugging and testing, user boot, simply press the zero button can formally test. The random standard density chip, for users compared verify.
4.Transmission density of less than 4. Measurable 4.0D, also makes reference to the value of greater than 4.0D is the ideal instrument for the analysis of pressure vessel, hull, chemical, bridges, hospitals and other X-ray quality.
Working principles:
The black and white density meter is used to measure the amount of light transmitted through the transparent material (such as soft patches ), in order to determine the instrument of the surface absorption of the amount of light, it is primarily collected by the illumination system, the light and the measurement system and a signal processing system constitutes. Using AC modulated light is provided with a certain quality and stability of the light source, and converts it into electrical signals, perform signal processing by the photoelectric sensor to receive the amount of light through the measured back sheet into the microcontroller, and ultimately will be measured density values of the back sheet displayed on the display.
Technical specifications:
Model | DM2010 | DM2010A | DM2011 |
Density range | D=0.00 — 4.00 | D=0.00-4.50 | D=0.00-5.00 |
Reading stability | ±0.02 | ||
Uncertainty | 0.00 — 3.00 0.02D 3.00 — 4.00 0.03D | 0.00 — 3.00 0.02D | 0.00 — 3.00 0.02D |
Power supply | 50~60Hz,220V±10% | ||
Overall dimensions | 300 × 280 × 150mm (L × W × H) | ||
Aperture size | Diameter 2.00mm | ||
Display mode | Three figures display | ||
Sampling time | 0.8 seconds | ||
Work Environment | Temperature 0 °C ~ 40 °C, relative humidity is below 85% | ||
Power dissipation | Approximately 25W | ||
Weight | About 3kg | ||
We believe that the quality is the soul of an enterprise.
Therefore, we always put quality as the first consideration.
Choose our products is your best choice!
